Home Up a Level Store Top Terms & Conds Search View Cart Checkout  Contact Us Login

Engine Build Tools

Online Catalogue |  Engine Build Tools

Page:  1  2  3   >   >>   View All (33) Page:  1  2  3   >   >>   View All (33)
14mm 2 Stroke Piston Locking Tool

14mm 2 Stroke Piston Locking Tool

This tool can be used to lock an engine piston thereby facilitating the removal of crankshaft nuts. The tool has a domed plastic end to prevent damage to the surface of the piston, making it an invaluable tool when working on two stroke engines.

That said, it must be used with caution because if undue force is applied to the crankshaft it may be possible to damage either the tool or the pistonm, crank, connecting rod and/or bearings. The use of high torque impact wrenches would not be advised and we sell this with the assumption that the user will have sufficient experience to understand what is a safe torque to use.

Particularly recommended for KTM XC, EXC, SX 300, 250, 200, 125 and 50cc machines.

Price: £9.39 (Excluding VAT at 20%)

Quantity:

Seal and 'O' Ring Removal Set

Seal and 'O' Ring Removal Set

We bought this new product a few months ago and have found it to be excellent. It's one of those tool sets you never knew you needed; but now we wouldn't let it out of our workshop for all the tea in China. The product below was fantastic compared with screwdrivers etc - but this set is another ball game. There are tools for every seal we have come across since it's purchase. It not only gets them out more easily but also removes them in such a way that you could re-use them if they were in good condition originally, though we tend to renew seals as a matter of course. For what you get the

Price: £49.42 (Excluding VAT at 20%)

Quantity:

Gudgeon Pin Puller

Gudgeon Pin Puller

There is only one way to safely remove the piston or gudgeon pin from a piston, without risking damage to the connecting rod, smal and big end bearings, and that is with a proper tool.

This is such a tool and is properly manufactured for professional use. It is a premium quality tool that will see out most engine fettlers however many engines they build.

Price: £44.20 (Excluding VAT at 20%)

Quantity:

Cylinder Head Stands

Cylinder Head Stands

Cylinder head stands are not expensive and make life so much easier, particularly with a multi cylinder engine. The tapered pins locate in the stud holes making it much easier to remove valves and lap faces etc

We've been using heads stands in our workshop for years.

Supplied as a pair.

Price: £18.99 (Excluding VAT at 20%)

Quantity:

Small Engine Build Stand

Small Engine Build Stand

Suitable for lower capacity single and twin cylinder engines.

Supports can rotate for accessibility to all parts of the engine.

Useful integral utility/drip tray.

Price: £83.97 (Excluding VAT at 20%)

Quantity:

Engine Build Stand

Engine Build Stand

Suitable for supporting large multi-cylinder engines (maximum weight 75kg).

The supports can rotate for accessibility to all parts of the engine.

Width, height and length adjustable.

Price: £102.17 (Excluding VAT at 20%)

Quantity:

Universal Adjustable Pin Wrench

Universal Adjustable Pin Wrench

This invaluable tool has dozens of uses when working on motorcycles including locking and retaining flywheels, pulleys, camshafts and clutch parts.

It comes with five sets of pins 5.0 x 8 / 6,0 x 10 / 7.7 x 19, 10.0 and 16mm

Price: £34.64 (Excluding VAT at 20%)

Quantity:

Stud Installation Kit

Stud Installation Kit

Motorcycle stud installation kit. This is a great innovative new product. We liked what we saw and have just test driven the M10 x 1.25 driver with the studs on a GPZ 1100 Unitrak engine we're building! It is a cracking tool and the test kit is now in our roller cab! The tool grips the top of the stud threads and has a ball bearing that bears on the top face of the stud therefore not causing any damage. You can sometimes install studs by locking two nuts together, but on many head studs there isn't enough thread to get a good lock. These head and barrel studs were a typical example of a situation when the two lock nuts wouldn't work.

It is suitable for M6 x 1.0, M8 x 1.25 and M10 x 1.25 thread studs and is used by a 19mm spanner or socket.

Price: £9.35 (Excluding VAT at 20%)

Quantity:

Oil Seal Removal Tool

Oil Seal Removal Tool

This simple tool is great for extracting oil seals from engine cases etc Too many engines are damaged by people using the wrong tools for this simple task, when the correct tool is as cheap as chips.

Price: £6.99 (Excluding VAT at 20%)

Quantity:

Laser Motorcycle Valve Spring Compressor Set

Laser Motorcycle Valve Spring Compressor Set

Valve spring compressor set for motorcycle engines

• Complete with 5 adaptors 16mm, 19mm, 23mm, 25mm & 30mm
• Suitable for a wide range of vehicles
• Two sizes of threaded bar for wider applications
• 100mm throat depth

Price: £53.47 (Excluding VAT at 20%)

Quantity:

Automatic Valve Lapping Tool

Automatic Valve Lapping Tool

This is a fab bit of kit. Whilst the traditional lapping stick has been around for years and will get the job done, no one has ever said that it's a joy to use. This tool fits in a standard cordless drill chuck and makes lapping valves a whole load easier. The suction cup attached in the same way as with a lapping stick and the body of the tool is held in your left hand and drill is run fairly slowly and the valve is oscillated back and forward just as with the stick, but with far less effort. We have found this tool saves a huge amount of both time and angst.

Price: £25.94 (Excluding VAT at 20%)

Quantity:

2 Piece Valve Lapping Stick Set

2 Piece Valve Lapping Stick Set

2off wooden handled double ended valve grinding sticks.

16mm, 20mm, 29mm & 35mm diameter sucktion cups.

Price: £9.24 (Excluding VAT at 20%)

Quantity:

Page:  1  2  3   >   >>   View All (33) Online Catalogue > Engine Build Tools