Home Up a Level Store Top Terms & Conds Search View Cart Checkout  Contact Us Login

Wheels and Drive Chains

Online Catalogue |  Wheels and Drive Chains

Show First 12 Product(s) Show First 12 Product(s)
Emergency Tyre Repair Kit for Tubeless Tyres

Emergency Tyre Repair Kit for Tubeless Tyres

This compact kit contains everything you need to repair a puncture in a tubeless tyre in an emergency. Whilst people do repair tyres and ride round on them until totally worn out, we would suggest that is meaness taken too far. These repairs will get you safely home and to somewhere to have the tyre replaced. We would never advise riding on repaired tyres. The little cylinders will inflate the tyre to get you to a garage where you should inflate the tyre to the correct pressure. The tyre is repaired without removing from the wheel.

Ralph had the misfortune to try one out himself on the M5 recently. It worked a treat, which is why we are now confident to offer these for sale. These make a far better repair than the aerosol emergency tyre repairs, though they are more difficult to use. We at Biker's Toolbox are very impressed with these kits and we all now carry them on our on all our bikes that have tubeless tyres. They take up less space than aerosols.


Price: 17.43 (Excluding VAT at 20%)

Quantity:

Tyre Valve Insertion Tool

Tyre Valve Insertion Tool

This valve holder wrench is used to fit rubber tyre valve holders into the wheel rim of tubeless rims. These valve holders should always be changed when the tyre is changed. The whench has a nice valve key built into the handle which can't be seen in the photo. Not only is this product cheaper than the metal one, but being plastic is is less likely to mark an alloy rim.

Price: 3.64 (Excluding VAT at 20%)

Quantity:

Chain Monkey

Chain Monkey

Chain Monkey is the world's first tool designed to help you set the tension on your motorcycle's drive chain. The task of tensioning a chain can be a tedious and time consuming task, especially on motorcycles. But not anymore.
· World's first tool to help you set chain tension
· Simplifies tedious and time consuming task
· Quickly and easily set correct chain tension
· Minimal technical knowledge required
· Ideal for new riders through to experienced mechanics
· Revolutionary, patented design
As seen on BBC Dragons Den


Price: 20.99 (Excluding VAT at 20%)

Quantity:

Chain Alignment Tool

Chain Alignment Tool

This is a simple to use tool to help align the chain and rear sprocket. A badly aligned chain with put unnecessary wear on the chain and sprockets. To be honest we use the Profi LASER SE Cat laser alignment tool which is much more accurate and easy to use and is also great for aligning belts on Harley Davidsons. If you're skint this tool is much better than guess work, but we would recommend the laser one!

Price: 8.39 (Excluding VAT at 20%)

Quantity:

Profi Line Cat Laser Chain Alignment Tool

Profi Line Cat Laser Chain Alignment Tool

This cracking little tool is held against the rear sprocket and shines a laser line down the chain run. You just move the adjusters until the line is straight with the chain. It's the easiest way to get your rear wheel lined up.

Price: 49.99 (Excluding VAT at 20%)

Quantity:

Digital Tyre Tread Depth Gauge

Digital Tyre Tread Depth Gauge

This handy tool features a large LCD display, zero setting and can switch from metric to imperial measurements.

Simple ON/OFF with 1.5v LR44 battery included *.

LCD will flash when the battery is low.

Range 0-25mm CE certificated.

Can also be used for brake shoe and pad wear. Composite construction.

* For overseas customers we have to remove batteries from shipments outside UK with DPD


Price: 17.23 (Excluding VAT at 20%)

Quantity:

Light Alloy Angle Tyre Valves

Light Alloy Angle Tyre Valves

How fed up do you get trying to get the airline in a garage on your tyre valve? It used to drive me bonkers. When I got my Triumph Sprint 1050 ST it came standard with angled tyre valves! On every bike I owned since then, that had tubeless tyres, I fitted theTriumph tyre valves to! They aren't cheap from Triumph, but are worth every penny! Recently a couple of my suppliers have woken up to the need and are selling alloy tyre valves which look to me to be exactly the same as th egenuine Triumph one, but are quite a bit cheaper! Thay look loads better than standard tyre valves and are lighter ... win, win, win!! They're a piece of cake to fit, just don't over tighten them! We show how to fit them in the tyre fitting video.

Click here to see our video on tyre fitting

Even if you don't fancy fitting your own tyres, you can give them to the tyre fitter and tell him to fit then for you. They are available in two sizes 8.3mm and 11.3mm.


Quantity:

Size

Angled Tyre Valve Extenders

Angled Tyre Valve Extenders

In our opinion these should be supplied under the seat of any motorcycle sold, that doesn't have angled tyre valves as standard. How many times have you fought with an air line in a garage trying to get it on the valve and ended up ruining the threads on your tyre valve? We discovered this product a few years ago and have one under the seat of all our bikes, just in case. You shouldn't leave them on the valve permanently as that will unbalance your wheel, but they are a God send! You need to remove them swiftly as they will let out a tiny amount of air as they come on and off. We usually put an extra pound or two in to compensate.

Price: 4.16 (Excluding VAT at 20%)

Quantity:

Tyre Valve Access Tool

Tyre Valve Access Tool

Many, if not most, forecourt air lines are not motorcycle friendly. This may be rotten prejudice against bikers, but there seems little we can do about it except work around the problem. This valve extension makes life much easier and is small enough to carry under the seat. It's 8" (200mm) long which is perfect.

Price: 15.76 (Excluding VAT at 20%)

Quantity:

Aluminium Piston Shaped Valve Caps

Aluminium Piston Shaped Valve Caps

These have no real practical advantage over the standard valve caps that came with your bike .... except that they're soooo cute !! We love them cos they're not obvious bling, but make a nice detail!

They are made in different colours, but we're currently only stocking the plain aluminium ones unless we are bombarded with e-mail demanding options such as black, blue, gold, green, purple or red


Price: 1.65 (Excluding VAT at 20%)

Quantity:

Knurled Aluminium Valve Caps

Knurled Aluminium Valve Caps

These are nicely made with an 'o' ring seal. They are much easier to remove with the knurled finish and make a good seal.

They are made in different colours, but we're currently only stocking the plain aluminium ones, unless we are bombarded with e-mails demanding options such as black, blue, gold, green, purple or red


Price: 1.65 (Excluding VAT at 20%)

Quantity:

Rim Protectors

Rim Protectors

These are an absolute must for changing tyres. Without them you will damage the rims. They are sold in packs of two, though we tend to use at least two sets when changing tyres. You can't be too careful when using tyre levers!

Click here to see our new video on tyre fitting


Price: 4.45 (Excluding VAT at 20%)

Quantity:

4 Way Valve Tool

4 Way Valve Tool

This tool can clean up damaged threads both inside and outside, ream the valve seat and is used most for removing the valve.

Price: 2.56 (Excluding VAT at 20%)

Quantity:

Inner Tube Valve Puller

Inner Tube Valve Puller

How big a pain in the backside is it trying to fight the tube valve into the hole in the wheel rim? This natty new tool makes it sooooo much easier. Simply poke the tool end through the hole, screw it into the valve holder of the tube and pull it back through the rim hole. A simple, inexpensive tool that can make a fiddly job easy.

Click here to see our new video on tyre fitting


Price: 6.99 (Excluding VAT at 20%)

Quantity:

270mm Motorcycle Tyre Lever

270mm Motorcycle Tyre Lever

This quality tyre lever is designed especially for motorcycle tyres. It is made from drop forged steel for strength and has a moulded plastic handle for comfortable use.

Price: 11.13 (Excluding VAT at 20%)

Quantity:

380mm Motorcycle Tyre Lever

380mm Motorcycle Tyre Lever

Specially designed angle of blade for use on motorcycles. Made from Chrome Molybdenum for strength, with ergonomic shaped aluminium handle

Price: 10.85 (Excluding VAT at 20%)

Quantity:


People who bought this item also bought:
1. Bike-It Chain Spring-Link Pliers
2. Lead Wheel Balance Weights
3. JIS Impact Bits

240mm Tyre Lever Set

240mm Tyre Lever Set

A set of three professional quality 240mm tyre levers and a hook ring to hold a lever in place by attaching to a wheel spoke.

Price: 16.84 (Excluding VAT at 20%)

Quantity:


People who bought this item also bought:
1. Inner Tube Valve Puller
2. Rim Protectors
3. Tyre Fitting Paste

Bike-It Tyre Bead Breaker

Bike-It Tyre Bead Breaker

Portable bead breaker suitable for tyres from 16" upwards. We have used this model of bead breaker in our workshop for years and it does what it says on the tin! Yes we would love to have a big industrial motorised machine, but they cost loads of money and take up loads of workshop space and can't be transported to the side of a road to change a tyre on a stricken bike.



Click here to see our video on tyre fitting


Price: 69.99 (Excluding VAT at 20%)

Quantity:


People who bought this item also bought:
1. Tyre Lube

Tyre Fitting Paste

Tyre Fitting Paste

This tyre fitting paste, sometimes refered to as tyre soap, more from it's consistancy than its effect, can be brushed onto the tyre and the rim to make the removing and fitting tyres much easier. Dry tyres are really hard work to push on and off the rim, but this inexpensive lubricant makes all the difference. Also, once the tyre is on the rim it makes it easier to get the bead to pop out, when you first inflate it. A tub this size lasts for ages, unless you're fitting tyres for a living in which case we can supply a bigger size if required.

Click here to see our video on tyre fitting


Price: 4.99 (Excluding VAT at 20%)

Quantity:

Tyre Lube

Tyre Lube

Non-residue, low friction tyre fitting gel. It does what it says on the pot!

It leaves the tyres cleaner than traditional tyre fitting soap (paste). We have used both in our workshops and whilst the gel saves a little bit of wiping, 250ml of gel is the same price as 1kg of paste - how much do you hate cleaning? On balance the gel is marginally easier to use, but it really comes down to preference. In a busy tyre shop the soap wins hands down on price.

Click here to see our video on tyre fitting


Price: 5.59 (Excluding VAT at 20%)

Quantity:

Wheel Building and Balancing Stand

Wheel Building and Balancing Stand

Ralph reviewed this product as "Tool of the Month" in Classic Motorcycle Mechanics magazine (March 2024) and was blown away by it. We have been waiting impatiently since we started Biker's Toolbox for someone to manufacture a decent wheel building frame that actually works. This jig works a treat. Its primary use is as a wheel builder and as far as we are aware it is the ONLY competant tool on the market for this job. It has the second use as a wheel balancer. As a balancer it's great, but is limited in size. During testing it proved not to be wide enough to take a rear wheel from a modern Z900RS and hasn't enough depth to balance a 21" tyre off a trail bike. This unit has the extra advantage of folding up so that it doesn't take up much space

This dual purpose stand is designed to support a motorcycle wheel through the wheel bearings, allowing it to be freely rotated so that it can be checked for both balance and rim alignment. The stand features an adjustable pointer which can be set so that radial and lateral runout can be checked and adjusted, with gravity being used to find the heavy spot on the wheel and tyre combination. The stand is foldable making it ideal for mobile use and easy to store when not in use.

• Designed for manual wheel balancing & checking rim alignment of all types of motorcycle wheel.
• Particularly useful when fitting new spokes or rebuilding a spoked wheel to ensure the wheel is true in all directions.
• Suitable for road & off-road motorcycle wheels.
•Will fit rims up to 5” (125mm) wide, maximum rim diameter 23” (585mm).


Price: 92.64 (Excluding VAT at 20%)

Quantity:

Spoke Spanner and Torque Wrench Set

Spoke Spanner and Torque Wrench Set

Spoke wrench set with interchangeable spoke wrench heads and an adjustable torque wrench, allowing spokes to be replaced in accordance with the wheel manufacturers specifications and set to the correct torque. All packed in a blow mould storage case with an EVA foam insert.

• Kit includes: Torque wrench 2-7Nm & wrench handle. 9 x interchangeable spoke wrench heads: 5.6, 5.8, 6.1, 6.3, 6.5, 6.7, 6.9, 7.1mm & Spline type.
• Designed to allow the replacement of a wheel spoke & tightening to the correct torque.
• Applications include, but are not restricted to: BMW, KTM, Ducati & Excel Rims.
• Over or under tightening of spokes can easily lead to excessive radial & lateral runout. Always check radial & lateral runout when replacing spokes & set the torque to the manufacturers specification.
• Can be used in conjunction with the Laser Motorcycle Wheel Balancer & Alignment Stand,. Supplied with certificate of conformity.


Price: 90.59 (Excluding VAT at 20%)

Quantity:

Portable Wheel Balancer

Portable Wheel Balancer

This is a well made, simple wheel balance frame. We have used this product for years in our workshop and it has done sterling service. Once you've used it a bit you'll find that it isn't really that much slower than a big whoopy doo dynamic balancing machine, which costs a shed load of money and takes up a huge footprint in the workshop.

It comes with 17 - 25mm cones and spindles as standard. We sell a larger cone kit for 24mm - 38mm bearing centres but we very rarely use them as we concentrate on classic bikes which don't have the big monster axles of some of the modern bikes!

Click here to see our new video on tyre fitting


Price: 69.99 (Excluding VAT at 20%)

Quantity:

Wheel Balancer 24mm - 38mm Cone Set

Wheel Balancer 24mm - 38mm Cone Set

24mm to 38mm cones to use with modern bike wheels with larger wheel spindles with the Bike-It wheel balancer.

Price: 12.59 (Excluding VAT at 20%)

Quantity:

Static Wheel Balancer Accessories

Static Wheel Balancer Accessories

We supply a selection of extra accessories for the above wheel balance and build frame to suit specific applications:
1) 12mm axle
2) 16-30mm cones
3) 24-38mm cones
4) Adapters to use with Triumph, Ducati and Honda wheels from single sided swing arm models.
5) Adapters for use with BMW wheels
6) Adapters for BMW R1200 and K1200 wheels for years 2006 onwards
7) Axle and cones for scooters and maxi-scooters


Quantity:

Accessories

Lead Wheel Balance Weights

Lead Wheel Balance Weights

We like the traditional self adhesive lead motorcycle wheel weights as they look much nicer and are easier to fit on the narrow rims on classic bikes. These weights are in strips of 13 alternating between 5g (7off) and 2.5g (6off).

Obviously when handling lead, you need to wash your hands afterwards and don't lick your fingers!

Click here to see our video on tyre fitting and balancing


Price: 6.99 (Excluding VAT at 20%)

Quantity:

Black Wheel Balance Weights

Black Wheel Balance Weights

Black zinc plated steel self adhesive motorcycle wheel weights. These are great when you have black painted wheels. Each strip has 4off 5g and 4off 10g weights. The strips are 15mm wide.

Supplied in 5 strip packets


Price: 3.99 (Excluding VAT at 20%)

Quantity:

Wheel Balance Weights

Wheel Balance Weights

These are zinc plated steel wheel weights. They are self adhesive in strips of eight, alternating in sizes of 5 and 10 gram weights. We sell them in packs of 5 strips and big boxes of 50 strips, for those who balance a lot of wheels. They are lead free, which keeps Mr Health & Safety happy.

Click here to see our video on tyre fitting and balancing


Quantity:

Pack options

Universal Spoke Tool

Universal Spoke Tool

Italian made professional spoke wrench. This covers six sizes of spokes (measured across the nut flats) - 5.65mm, 5.75mm, 6.00mm, 6.35, 6.65mm & 6.85mm.

Price: 9.09 (Excluding VAT at 20%)

Quantity:

Bike It Spoke Wrench Set

Bike It Spoke Wrench Set

Bike It Spoke spanner set.

Four sizes - #8, #9, #10 & #11


Price: 8.39 (Excluding VAT at 20%)

Quantity:

Wheel Spindle Tool

Wheel Spindle Tool

This tool is used on more modern bikes with hollow wheel spindles. It is suitable for sizes 17mm, 19mm, 22mm and 24mm which covers the vast majority of bikes with this type of spindle. You can use either a 3/8" socket wrench or a suitable socket for the end opposite the end that you have fitted into the spindle.

Price: 18.89 (Excluding VAT at 20%)

Quantity:

Laser Wheel Spindle Tool

Laser Wheel Spindle Tool

This tool is used on more modern bikes with hollow wheel spindles. It is suitable for sizes 17mm, 19mm, 22mm and 24mm which covers the vast majority of bikes with this type of spindle. You can use either a 3/8" socket wrench or a suitable socket for the end opposite the end that you have fitted into the spindle.

Price: 31.70 (Excluding VAT at 20%)

Quantity:

Chain Cleaner

Chain Cleaner

High quality professional chain cleaner suitable for use with standard, 'o' ring and even 'x' ring chains.

Most motorcyclists are aware that they should lube their drive chains with a good quality chain lube; what many bikers are less aware that one needs to clean them. The problem is that grit, sand etc tends to stick to the lube on the chain creating a grinding paste. You should give the chain a good clean using a chain cleaner and chain brush from time to time. Obviously once the chain is clean you need to re-lube it. Well looked after quality drive chains will last tens of thousands of miles; unloved chains will last only hundreds.

300ml aerosol


Price: 5.40 (Excluding VAT at 20%)

Quantity:

Bike-It Chain Spring-Link Pliers

Bike-It Chain Spring-Link Pliers

Fitting and removing drive chain spring links can be a right royal pain. Using these special pliers, it becomes a piece of cake. The shorter end has a cut out that engages with the pin, whilst the longer part acts on the spring clip to either fit or remove it.

Price: 6.99 (Excluding VAT at 20%)

Quantity:

Motorcycle Chain Puller

Motorcycle Chain Puller

A motorcycle chain puller for removing and replacing chain links. Used with chain breakers and riveting tool.

Designed to ensure the split link pins are properly seated to make fitting the clip easier.

For use on chain sizes: 428, 520, 525, 528, 530.

Max opening: 25mm.


Price: 13.27 (Excluding VAT at 20%)

Quantity:


People who bought this item also bought:
1. Bike-It Chain Spring-Link Pliers
2. Lead Wheel Balance Weights
3. JIS Impact Bits

Chain Puller

Chain Puller

This tool is used to draw the two ends of a chain together when joining it. Particularly with a heavier chain pulling the two ends of the chain together and and fitting the link in can be quite challenging. It doersn't matter whether it's a rivet link or a spring link, this relatively cheap tool makes life a great deal easier.

Price: 13.99 (Excluding VAT at 20%)

Quantity:

Chain Brush

Chain Brush

Blue plastic brush to clean the drive chain. Double headed brush to really get into the crap picked up by a well oiled chain. It is suitable for use with 'o' and 'x' ring chains. Keep those gold chains ... gold!



Price: 9.52 (Excluding VAT at 20%)

Quantity:

Tirox 360 Chain Brush

Tirox 360° Chain Brush

Fast, easy and precise chain cleaning device. This brush simply 'screws on' to the drive chain, with bristles attacking the crud with 360° cleaning around the chain. It is designed for chains from 415 to 630 and is 'o' and 'x' ring safe.

Price: 10.49 (Excluding VAT at 20%)

Quantity:

Kellerman Professional Chain Breaker and Riveter KTW2.5

Kellerman Professional Chain Breaker and Riveter KTW2.5

The Kellermann chain tool KTW 2.5 is the enhanced version of the professional KTW 2.0 that has been lauded by the trade for some years

It allows an easy removal of the worn chain and a precise assembly of the new chain with hollow rivets, so that the swingarm can stay installed. The tool is designed for chains of all brands (such as DID, Regina, RK, etc.). The tool now comes with two arbors for different diameters. The pre-installed arbor is now stronger and works for 5xx und 6xx chains.
The additional arbor especially works for 4xx chains. For use in addition only a 19mm ring or socket wrench is required.

The chain tool contains a patented, magnetic positioning tool for the assembly of the connecting link,
which ensures simple and absolutely precise mounting of the side plate of the connecting link. The positioning unit consists of two magnetic plates that are coupled together via a guide.This design allows a precise and comfortable positioning of the parts of the connecting link. The plates stick magnetically to the connecting link, so you have the hands free to work. Crucial for the assembly of the connecting link is, that you don ´t insert the side plate too far onto the pins. To prevent this reliably, the plates act as a limit stop and extend to the adjacent chain links. You can see with naked eye through the cut-outs in the push plate, if the side plate of the connecting link is in the right position and you have to stop pushing it.

So connecting link assembly errors are largely excluded and the assembly of the connecting link is neither time consuming nor nerve wrecking any more.

Rivet head molder Extension set for full rivet locks Part No. 130.250

This chain tool is capable to handle full rivet locks by using our extension set. Convenient Handling: Just replace the guide of the pin punch against the attached rivet head molder guide. Push the rivet head into the guideway by what its usable. The force is transmitted by the pin punch to the rivet head.

• Chain Breaking
• Connecting link assembly
• Rivetting the bolts


Price: 100.59 (Excluding VAT at 20%)

Quantity:

DID Chain Breaker & Riveting tool

DID Chain Breaker & Riveting tool

This is the original DID KM500 chain breaking and riveting tool specifically designed for the rivetting of DID's original ZJ rivet lock. It is not suitable for other types of chain. This tool is suitable for all DID 520, 525, 530 and 532 chains, including 'o' ring and 'x' ring chains

As you would expect from DID, it is a very high quality professional tool which we would strongly recommend.

We also supply new cutting and riveting pins when required.


Quantity:

Tool or Spare Pin

Laser Chain Breaker and Riveting Tool Set

Laser Chain Breaker and Riveting Tool Set

A comprehensive tool set for shortening and lengthening chains by removing or replacing the links.

Set includes tools for riveting links in place plus plate holder for connecting links accurately

Works on chain sizes 520 - 530, 420, 428. Recommended for light to medium duty use.

Set includes:- Pin holder with 27mm fixed shaft | 19mm pin head, U holder with X/Y positional fixings, plate holder, 3 | 4 | 5mm pins and anvils

It includes tools for riveting, plus a plate holder for connecting links accurately.


Price: 131.17 (Excluding VAT at 20%)

Quantity:

Motorcycle Chain Link Extractor and Riveter

Motorcycle Chain Link Extractor and Riveter

This chain splitter and riveter is suitable for cam chains and drive chains from #35 to #630.

Most chain breakers and riveters will not split and rivet cam chains


Price: 68.26 (Excluding VAT at 20%)

Quantity:

Laser Motorcycle Chain Tool Kit

Laser Motorcycle Chain Tool Kit

This new professional tool kit from Laser Tools brings together three chain service tools in one set:

• A pair of chain link removal pliers that make removing and refitting the spring clips used on some smaller chains an easy job.

• A chain stretch tool that acts as a second pair of hands and holds the two ends of the chain together while the operator assembles the new split link.

• A comprehensive chain link splitter and riveting tool — essential for removing and refitting motorcycle drive chains, primary drive chains and engine timing chains.

This is a professional and comprehensive kit, and covers chain sizes from small timing chains (minimum pin diameter of 2.2 mm) to heavy duty 630 drive chains.


Price: 88.19 (Excluding VAT at 20%)

Quantity:

Professional Chain Breaker and Riveting Tool

Professional Chain Breaker and Riveting Tool

We have been using this model in our workshop for some years now and have nothing but praise for it. It is suitable for all chains, including 'o' ring and 'x' ring chains from 415 to 530 size. Although you shouldn't, we have abused ours with an air impact wrench and it keeps coming back for more.



We also supply a full range of consumable spares for this tool, listed in the drop down box below


Quantity:

Whole set or parts

Whale Professional Chain Breaker & Riveting Tool

Whale Professional Chain Breaker & Riveting Tool

A very strong professional tool specifically for solid rivets. Suitable for 520 to 532 chains

Price: 128.17 (Excluding VAT at 20%)

Quantity:

Show First 12 Product(s) Online Catalogue > Wheels and Drive Chains