-
files/D_Synch_L_77c0f386-23f2-4c4f-9b9e-4572af9ce739.gif
This is more, much more, than a PC based vacuum gauge set. The software runs on a standard Windows PC and shows a huge amount of data gleaned from intake vacuum measurements. It displays the average vacuum on a bar chart for carb/throttle body balancing but also plots the vacuum on a graph against time from which you can detect issues such as leaking inlet rubbers as well as poor seating of exhaust and inlet valves. If you really read up on the significance of the graph traces you can identify more complex issues with the carbs/throttle bodies. Each cylinder is given a colour, No 1 Black, 2 Green, 3 Red and 4 Yellow making it easier to distinguish between the graph traces. The software is easy to use and provides a plethora of data including minimum and maximum vacuum for each inlet as well as average figures. One can switch on and off inputs in the software to get a clearer look at individual cylinders. The software will record a diagnostic session which can be played back at any time for reappraisal or just to impress your mates down the pub. The recorded session can be played back as though it were a master video with full functionality ie you can turn on and off channels zoom in etc. For simply balancing carburettors or throttle bodies it makes life very easy. As with any vacuum analysing tool you connect the pipes to the intake outlets which are sometimes on the carbs or little stub pipes on the inlet rubbers as in the case of Kawasaki's mighty Z1 series bikes. The little black box is then plugged into the USB port of your Windows laptop and the software is easily downloaded from the website and installed. I am very reluctant and impatient when it comes to learning new software, but fortunately this is so easy to use I found a bit of poking here and there with a mouse and all was working without resorting to a manual. When balancing carbs/throttle bodies the bar graph background turns green when they are well within tolerance which makes it so easy. The Dsynch2 is supplied in a plastic case.
This is more, much more, than a PC based vacuum gauge set. The software runs on a standard Windows PC and shows a huge amount of data gleaned from intake vacuum measurements. It displays the average vacuum on a bar chart for carb/throttle body balancing but also plots the vacuum on a graph against time from which you can detect issues such as leaking inlet rubbers as well as poor seating of exhaust and inlet valves. If you really read up on the significance of the graph traces you can identify more complex issues with the carbs/throttle bodies. Each cylinder is given a colour, No 1 Black, 2 Green, 3 Red and 4 Yellow making it easier to distinguish between the graph traces. The software is easy to use and provides a plethora of data including minimum and maximum vacuum for each inlet as well as average figures. One can switch on and off inputs in the software to get a clearer look at individual cylinders. The software will record a diagnostic session which can be played back at any time for reappraisal or just to impress your mates down the pub. The recorded session can be played back as though it were a master video with full functionality ie you can turn on and off channels zoom in etc. For simply balancing carburettors or throttle bodies it makes life very easy. As with any vacuum analysing tool you connect the pipes to the intake outlets which are sometimes on the carbs or little stub pipes on the inlet rubbers as in the case of Kawasaki's mighty Z1 series bikes. The little black box is then plugged into the USB port of your Windows laptop and the software is easily downloaded from the website and installed. I am very reluctant and impatient when it comes to learning new software, but fortunately this is so easy to use I found a bit of poking here and there with a mouse and all was working without resorting to a manual. When balancing carbs/throttle bodies the bar graph background turns green when they are well within tolerance which makes it so easy. The Dsynch2 is supplied in a plastic case.
- Regular price
- £238.80
Let customers speak for us
Quality item, so much better than generic kit you can get on line. Repeat customer, says it all.
Fantastic done the job thank you
I hate changing tyres, but this stuff made the job much easier.
I broke the bead on the old tyre then applied the paste with a paint brush. Ten year old Bridgestone slid off easily and the new Heidenau, with very stiff sidewalls, was fitted much more easily than when I’d tried with washing-up liquid.
After having struggled trying to set the pilot air screws on my Suzuki’s carb’s - I saw this recommended in Classic Motorcycle Mechanics and it is an excellent piece of kit and well made too.
Excellent quality, first time I’ve used ‘ball-ended’ they were so much more adaptable when trying to access restricted spaces. Well worth it !
The right length, the right colour and with crocodile clips on the ends...
Made the whole job so much easier, using the proper tools for the job gives you a sense of a job well done.
Speedy delivery, as usual, perfect wire for bike re wire, great with tracer colours. Very happy with price and materials. Thanks.
