-
files/BTBE007_L_8131b0a4-e653-4672-b008-f4e42583983e.jpg
These 2.8mm multi block connectors are commonly used on earlier Japanese motorcycles. They are a very useful and neat way to connect a group of wires eg Kawasaki often used them to join the handle bar switches to the main wiring harness. We often use them when making custom looms or upgrading Italian wiring to wiring that will work for more than a week!
They are easy enough to fit. You simply strip back the insulation on each piece of wire and crimp the terminals to the wires and push them into the relevant block from the back. If you need to pull a pin out simply use a terminal release tool.
You will need a non-insulated crimp tool for these terminals and we would recommend the ratcheting type; you'll only buy it once!
We supply a complete kit of male and female block and the male and female terminals. Usually if one side of a block has over heated or corroded it pays to change male and female plugs for a competent repair.
These 2.8mm multi block connectors are commonly used on earlier Japanese motorcycles. They are a very useful and neat way to connect a group of wires eg Kawasaki often used them to join the handle bar switches to the main wiring harness. We often use them when making custom looms or upgrading Italian wiring to wiring that will work for more than a week!
They are easy enough to fit. You simply strip back the insulation on each piece of wire and crimp the terminals to the wires and push them into the relevant block from the back. If you need to pull a pin out simply use a terminal release tool.
You will need a non-insulated crimp tool for these terminals and we would recommend the ratcheting type; you'll only buy it once!
We supply a complete kit of male and female block and the male and female terminals. Usually if one side of a block has over heated or corroded it pays to change male and female plugs for a competent repair.
- Regular price
- £1.40
Let customers speak for us
Quality items delivered quickly.
Good crimps. Brilliant for joining wire and the shrink tube provided is a bonus. A used a crimping tool I already had and it worked fine
Great service, great items exactly as description 👍
The only way to work on Japanese bikes without knackering up the screw heads. Fit perfectly in to a hex adaptor or impact driver
Not used these yet, however, they appear to be good quality and also referenced from the Haynes Manual for the Ducati Scrambler 803 so I'm hopeful these will allow me to do the belt change with minimal issues.
Arrived quickly and does what it says on the tun. Thank you 😊
I fitted this on Bikers Toolbox Advice to my 1967 Positive Earth Triumph that I was fitting with LED indicators, but i wired the flasher with L to Live from the battery as advised ( normally L is to indicator and B to battery). It worked a treat
Nice and compact, good quality, fits under the seat of my Tiger 800 nicely.
Great selection of products covering all requirements.
Recommend this company ~ 1st rate
All good, not a tool used every day, but its' use so far has been good.
