-
files/9091_1.jpg
-
files/9091_2.jpg
Specially designed to fit the fork caps found on the Öhlins NPX 43 forks fitted with Smart Electronic Control (S-EC). The socket has seven pin configuration with a 10mm wiring slot to allow the socket to fit snugly over the fork control wiring harness. The fork cap has 8 holes however only 7 can be used to allow for the harness slot.
- Applications include: Honda CBR 1000RR-R SP (from 2022), Triumph Speed Triple 1200 RR (from 2022).
- 7 x 2.3mm pins, 42mm PCD, 10mm sensor wiring slot.
- Aluminium body with steel pins protected by rubber base rings.
- Use with 1/2"D socketry or 24mm ring spanner. Not suitable for impact use.
- NOTE: Always loosen the top yoke (triple trees) fork tube clamps before attempting to loosen the cap.
Biker's Toolbox Limited
Fork Cap Socket - Öhlins NPX-43 Honda/Triumph
All UK Prices Inc VAT
- Regular price
- £44.52
Specially designed to fit the fork caps found on the Öhlins NPX 43 forks fitted with Smart Electronic Control (S-EC). The socket has seven pin configuration with a 10mm wiring slot to allow the socket to fit snugly over the fork control wiring harness. The fork cap has 8 holes however only 7 can be used to allow for the harness slot.
- Applications include: Honda CBR 1000RR-R SP (from 2022), Triumph Speed Triple 1200 RR (from 2022).
- 7 x 2.3mm pins, 42mm PCD, 10mm sensor wiring slot.
- Aluminium body with steel pins protected by rubber base rings.
- Use with 1/2"D socketry or 24mm ring spanner. Not suitable for impact use.
- NOTE: Always loosen the top yoke (triple trees) fork tube clamps before attempting to loosen the cap.
- Regular price
- £44.52
Let customers speak for us
Perfect as my aluminium ones were on their last legs
Good quality connector and terminals.
Perfect for a tidy wiring loom
Quality items delivered quickly.
Good crimps. Brilliant for joining wire and the shrink tube provided is a bonus. A used a crimping tool I already had and it worked fine
Great service, great items exactly as description 👍
The only way to work on Japanese bikes without knackering up the screw heads. Fit perfectly in to a hex adaptor or impact driver
Not used these yet, however, they appear to be good quality and also referenced from the Haynes Manual for the Ducati Scrambler 803 so I'm hopeful these will allow me to do the belt change with minimal issues.
Arrived quickly and does what it says on the tun. Thank you 😊
I fitted this on Bikers Toolbox Advice to my 1967 Positive Earth Triumph that I was fitting with LED indicators, but i wired the flasher with L to Live from the battery as advised ( normally L is to indicator and B to battery). It worked a treat
