-
files/7220775_L_62cb2e78-1303-4cdd-85aa-9ed4a126ccad.jpg
This is a very comprehensive tap and die set which is great for bikes as it has plenty of metric fine threads. The downside is at this price it isn't top end industrial quality, so if you're regularly cutting threads in 316 marine grade stainless, you'll need to dig deeper :) For cleaning out threads and making odd parts and repairs for your project bikes it will be fine. For high quality industrial threading tools you will pay the cost of this set for one size of taps (1st, 2nd taper and plug). A particular bonus with this set is that it has M7 which is uncommon but is often used on motorcycle caliper bleed nipples, which often get neglected and need the threads clearing!
The set has taps and dies to cover the following sizes: M3 x 0.5, M3 x 0.6, M4 x 0.7, M4 x 0.75, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x 1.0, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75 and 1/8" NPT x 27 (National Pipe Thread x 27TPI). The set also contain two tap wrenchs, a 25mm die stock, a rubbish screw driver, a rubbish looking centre punch, a useful wire brush and an uber useful thread pitch gauge.
This is a very comprehensive tap and die set which is great for bikes as it has plenty of metric fine threads. The downside is at this price it isn't top end industrial quality, so if you're regularly cutting threads in 316 marine grade stainless, you'll need to dig deeper :) For cleaning out threads and making odd parts and repairs for your project bikes it will be fine. For high quality industrial threading tools you will pay the cost of this set for one size of taps (1st, 2nd taper and plug). A particular bonus with this set is that it has M7 which is uncommon but is often used on motorcycle caliper bleed nipples, which often get neglected and need the threads clearing!
The set has taps and dies to cover the following sizes: M3 x 0.5, M3 x 0.6, M4 x 0.7, M4 x 0.75, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x 1.0, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75 and 1/8" NPT x 27 (National Pipe Thread x 27TPI). The set also contain two tap wrenchs, a 25mm die stock, a rubbish screw driver, a rubbish looking centre punch, a useful wire brush and an uber useful thread pitch gauge.
- Regular price
- £91.19
Let customers speak for us
Quality items delivered quickly.
Good crimps. Brilliant for joining wire and the shrink tube provided is a bonus. A used a crimping tool I already had and it worked fine
Great service, great items exactly as description 👍
The only way to work on Japanese bikes without knackering up the screw heads. Fit perfectly in to a hex adaptor or impact driver
Not used these yet, however, they appear to be good quality and also referenced from the Haynes Manual for the Ducati Scrambler 803 so I'm hopeful these will allow me to do the belt change with minimal issues.
Arrived quickly and does what it says on the tun. Thank you 😊
I fitted this on Bikers Toolbox Advice to my 1967 Positive Earth Triumph that I was fitting with LED indicators, but i wired the flasher with L to Live from the battery as advised ( normally L is to indicator and B to battery). It worked a treat
Nice and compact, good quality, fits under the seat of my Tiger 800 nicely.
Great selection of products covering all requirements.
Recommend this company ~ 1st rate
All good, not a tool used every day, but its' use so far has been good.
