-
files/CLBDUO_L_846ba43b-f9a6-4d18-84b3-a055875a4b53.gif
Two screw version similar to the above cable lubricator. The tool's rubber boot with the small end grips the inner wire of the cable whilst the outer is gripped by the other end. The screw is tightened up which ensures a seal around both ends. The straw of your lightweight oil aerosol (WD40 or equivalent) is pushed into the small hole in the bottom of the tool. When the button on the aerosol is pressed oil is forced into the void between the inner and outer parts of the cable. Keep going until oil is seen dribbling out the other end. Remove the tool and pull the inner cable in and out a bit. . Job Done!
Two screw version similar to the above cable lubricator. The tool's rubber boot with the small end grips the inner wire of the cable whilst the outer is gripped by the other end. The screw is tightened up which ensures a seal around both ends. The straw of your lightweight oil aerosol (WD40 or equivalent) is pushed into the small hole in the bottom of the tool. When the button on the aerosol is pressed oil is forced into the void between the inner and outer parts of the cable. Keep going until oil is seen dribbling out the other end. Remove the tool and pull the inner cable in and out a bit. . Job Done!
- Regular price
- £8.39
Let customers speak for us
As a fully qualified Motor Vehicle Engineer with 60 years experience I have always used Chemico Valve Grinding Paste to not only lap in valves in a cylinder head, but to also to lap in plain bushes to allow clearance for lubrication. I would not use or recommend anything else to carry out these tasks.
Fitted and doing just what was required.
Absolutely excellent , good service and v competative prices.
Great service, quality parts which is the main thing. Seemed to take a while to arrive, post office for you
Quality product, reasonable price.
Perfect weights good price and do what they need to do
All good. Thanks.
Good product. Flexible in a limited space allowed easier fuel line routing.
Exactly as described, excellent quality and well priced
Used for classic Kawasaki z900A4 , replaced the old corroded one for the left hand handlebar switchgear to main loom . Buy the Laser crimping tool to crimp the connectors correctly.
Thanks
Very good just what I was looking for.
This battery is a revelation and seemingly game changing battery technology. It is just so light! I initially thought it had nothing inside it, fitted it to my Guzzi and it cranked it over effortlessly, on a motorcycle any weight changing tech is obviously very welcome.
just what I needed at a good price and fast shipping.
Fsst post sensible prices , very good company to deal with
