-
files/9091_1.jpg
-
files/9091_2.jpg
Specially designed to fit the fork caps found on the Öhlins NPX 43 forks fitted with Smart Electronic Control (S-EC). The socket has seven pin configuration with a 10mm wiring slot to allow the socket to fit snugly over the fork control wiring harness. The fork cap has 8 holes however only 7 can be used to allow for the harness slot.
- Applications include: Honda CBR 1000RR-R SP (from 2022), Triumph Speed Triple 1200 RR (from 2022).
- 7 x 2.3mm pins, 42mm PCD, 10mm sensor wiring slot.
- Aluminium body with steel pins protected by rubber base rings.
- Use with 1/2"D socketry or 24mm ring spanner. Not suitable for impact use.
- NOTE: Always loosen the top yoke (triple trees) fork tube clamps before attempting to loosen the cap.
Biker's Toolbox Limited
Fork Cap Socket - Öhlins NPX-43 Honda/Triumph
All UK Prices Inc VAT
- Regular price
- £44.52
Specially designed to fit the fork caps found on the Öhlins NPX 43 forks fitted with Smart Electronic Control (S-EC). The socket has seven pin configuration with a 10mm wiring slot to allow the socket to fit snugly over the fork control wiring harness. The fork cap has 8 holes however only 7 can be used to allow for the harness slot.
- Applications include: Honda CBR 1000RR-R SP (from 2022), Triumph Speed Triple 1200 RR (from 2022).
- 7 x 2.3mm pins, 42mm PCD, 10mm sensor wiring slot.
- Aluminium body with steel pins protected by rubber base rings.
- Use with 1/2"D socketry or 24mm ring spanner. Not suitable for impact use.
- NOTE: Always loosen the top yoke (triple trees) fork tube clamps before attempting to loosen the cap.
- Regular price
- £44.52
Let customers speak for us
Really quick delivery and a great addition when rebuilding bluespots.
Quality item, so much better than generic kit you can get on line. Repeat customer, says it all.
Fantastic done the job thank you
I hate changing tyres, but this stuff made the job much easier.
I broke the bead on the old tyre then applied the paste with a paint brush. Ten year old Bridgestone slid off easily and the new Heidenau, with very stiff sidewalls, was fitted much more easily than when I’d tried with washing-up liquid.
After having struggled trying to set the pilot air screws on my Suzuki’s carb’s - I saw this recommended in Classic Motorcycle Mechanics and it is an excellent piece of kit and well made too.
Excellent quality, first time I’ve used ‘ball-ended’ they were so much more adaptable when trying to access restricted spaces. Well worth it !
The right length, the right colour and with crocodile clips on the ends...
Made the whole job so much easier, using the proper tools for the job gives you a sense of a job well done.
