-
files/BTB008_L_974d0645-1739-4cc2-8cbe-a1c665af1e30.jpg
These excellent quality hard wearing ratchet straps are manufactured to EN 12195-2:2001, so should not be confused with the nasty bright orange items commonly available from market stalls, fleabay etc. We tried the cheapo ones and nearly lost a restored 1977 Z1000A1 off the back of a trailer - never again.
To strap a bike down in a van or on trailer, we recommend using the Bike-It handlebar strap, with a ratchet strap either side, fully compressing the front forks. Any straps, whether used for lifting of securing should be looked after. Where possible try not to twist straps, don't allow them to become soaked with oil of other chemicals and whilst they are fine to be used outside, it is nor advisable to store in direct sunlight with the associated ultra violet rays.
These excellent quality hard wearing ratchet straps are manufactured to EN 12195-2:2001, so should not be confused with the nasty bright orange items commonly available from market stalls, fleabay etc. We tried the cheapo ones and nearly lost a restored 1977 Z1000A1 off the back of a trailer - never again.
To strap a bike down in a van or on trailer, we recommend using the Bike-It handlebar strap, with a ratchet strap either side, fully compressing the front forks. Any straps, whether used for lifting of securing should be looked after. Where possible try not to twist straps, don't allow them to become soaked with oil of other chemicals and whilst they are fine to be used outside, it is nor advisable to store in direct sunlight with the associated ultra violet rays.
- Regular price
- £7.45
Let customers speak for us
Perfect as my aluminium ones were on their last legs
Good quality connector and terminals.
Perfect for a tidy wiring loom
Quality items delivered quickly.
Good crimps. Brilliant for joining wire and the shrink tube provided is a bonus. A used a crimping tool I already had and it worked fine
Great service, great items exactly as description 👍
The only way to work on Japanese bikes without knackering up the screw heads. Fit perfectly in to a hex adaptor or impact driver
Not used these yet, however, they appear to be good quality and also referenced from the Haynes Manual for the Ducati Scrambler 803 so I'm hopeful these will allow me to do the belt change with minimal issues.
Arrived quickly and does what it says on the tun. Thank you 😊
I fitted this on Bikers Toolbox Advice to my 1967 Positive Earth Triumph that I was fitting with LED indicators, but i wired the flasher with L to Live from the battery as advised ( normally L is to indicator and B to battery). It worked a treat
